Country Manor Shake Aluminum Roofing Specifications

Home » Aluminum Roofing » Country Manor Shake Aluminum Roofing Specifications

Pre-Formed Accessories and Flashings:

  • Self-cleaning valley
  • Gable edge trim and gable caps
  • Starter strip and drip edge
  • Sidewall flashing
  • Matching coil stock
  • Hip and ridge caps
  • Color-matched butyl sealant
  • Vent pipe flashing
  • RoofAquaGuard underlayment
  • Optional snow guards
  • Available foam inserts for high traffic areas
  • Aluminum screw shank nails

Panel measurements are 48″ x 12″; 25 panels per 100 square feet. The weight of each square is 46 lbs. Classic Metal Roofing Systems’ Country Manor Shake panel is formed with the look of eight individual and deeply-grained simulated shakes. Furthermore, these shakes vary in height, width, and thickness to recreate the random three-dimensional appearance of real cedar shakes. Also, the product’s light weight makes it a breeze to install on any roof.

Our aluminum consists of .019” thick roofing panels. Matching accessories are .019” or .024” thick aluminum. All aluminum panels and accessories are made of a 3105-H25 aluminum sheet or equivalent. The aluminum also has a minimum of 95% recycled content. Its minimum roof pitch is 4:12 in snow areas or 3:12 in standard conditions.

These panels also include finishes that use industry-leading PVDF coating. In fact, all Country Manor Shake panels and factory-formed accessories are given two-coats of PVDF resin-based finishes: Kynar 500® or Hylar 5000®. In addition, these finishes include a baked-on topcoat and a protective primer to resist deterioration, chalking, and fading. Our finishes also provide a reflective pigment to improve the product’s energy-saving capabilities.

Country Manor Shake is a Metal Construction Association Certified Metal Roofing Product.

If you have any questions about our services, please make sure to call us. In fact, we always encourage contacting us for a free estimate.

Kynar 500® is a registered trademark belonging to Arkema Inc.
Hylar 5000® is a registered trademark belonging to Solvay


If you would like to learn more or to discuss
your project just give us a shout to get started.
There is no obligation.

Contact Us

Houston Metal Roofing Systems Site Map

Call Us
Email Us
Free Quote