Rustic Shingle Aluminum Roofing Specifications

Rustic Shingle is an aluminum roofing system which protects homes from rain, snow, hail, and winds up to 120 mph with its four-way interlocking design. With its realistic and classic design, and advanced finish, Rustic Shingle adds beauty and value for a lifetime. Reflective pigments in the finish combine with the product’s integral airspace and thermal break to maximize building energy performance.

For over 50 years, Rustic Shingle has provided beauty and protection to homes around the world, making it one of the roofing industry’s most proven and widely used products.

Pre-Formed Flashings and Accessories:

Hip and ridge caps
Self-cleaning valley
Combination starter strip / drip edge
Gable edge trim and optional gable caps
Sidewall flashing
Vent pipe flashing
Matching coil stock
Color-matched butyl sealant
RoofAquaGuard underlayment
Aluminum screw shank nails
Unique fastening clips
Optional snow guards
Available foam inserts for high traffic areas

Panel measurements: 24″ x 12″; 50 panels per 100 square feet;

Weight: 42 pounds per square
Rustic Shingle panels are fully interlocking and feature concealed fasteners. The deeply-formed aluminum shingles provide a realistic wood shingle or shake appearance. The product’s low weight allows installation over many existing roofs.

Aluminum: .019” thick
All aluminum panels and accessories are made of 3105-H25 aluminum sheet (minimum tensile strength 26,000 psi; minimum yield strength 22,000 psi) or equivalent. The aluminum has minimum 95% recycled content.

Minimum Roof Pitch: 3:12

Finish: Kynar 500® or Hylar 5000® PVDF resin-based finishes
Rustic Shingle panels and factory-formed accessories are protected with a two-coat, industry-leading PVDF coating technology, which includes a protective primer and baked-on high-performance topcoat to resist chalking, fading, and deterioration. The finish includes reflective pigment to enhance the product’s energy efficiency.

Rustic Shingle is a Metal Construction Association Certified Metal Roofing Product.

For more information or architectural specifications, please contact us.

Kynar 500® is a registered trademark belonging to Arkema Inc.
Hylar 5000® is a registered trademark belonging to Solvay

Rustic Shingle Aluminum Roofing Specifications

Would You Like to Learn More?

If you would like to learn more or to discuss your project just give us a shout to get started. There is no obligation.

All Star Roof Systems ////////

5425 FM 2920 Spring, Texas 77388

Phone (281) 987-9000
Fax (281) 350-0707

Our Service Area © 2017 All Star Roof Systems, Inc.

aluminum shake roofs, standing seam metal roofs, composite roofs, TPO roofs